For Dyson V7 V8 Accessories Holder – 2-Pack Clip-On Vacuum Tool Organizer

Keep the attachments you use most right on your vacuum. This For Dyson V7 V8 Accessories Holder 2-pack clips directly onto compatible vacuum wands, giving you quick access to your cleaning tools without walking back to the closet or docking area.

Designed for Dyson V7 SV11 and V8 SV10/SV25 models, each lightweight holder snaps securely onto the wand for simple, space-saving attachment storage while you clean.

Product Highlights

QUICK ACCESS TO YOUR CLEANING TOOLS

Keep frequently used vacuum attachments right where you need them. The vacuum attachment holder clips onto the wand so you can switch between compatible tools without returning to your storage area.

MADE For Dyson V7 V8 Accessories Holder

Designed for compatible Dyson V7 SV11 and V8 SV10/SV25 vacuum models. Check the model number on your vacuum before ordering to make sure it matches the compatibility list.

SECURE SNAP-ON DESIGN

The holder clips firmly onto the vacuum wand, while secure accessory slots help keep your attachments stable as you move from room to room.

DRILL-FREE, TOOL-FREE INSTALLATION

No screws. No drilling. No complicated setup. Simply snap the vacuum wand attachment holder onto the compatible tube and insert your accessories into the storage slots.

SAVE STORAGE SPACE

Keep multiple vacuum tools organized in one compact location instead of leaving attachments scattered around your closet, laundry room or garage.

LIGHTWEIGHT FOR EVERYDAY CLEANING

The compact design adds convenient storage without turning your vacuum setup into a bulky organizer. Keep your essential tools close and ready for everyday cleaning.

Keep Your Vacuum Attachments Within Reach

Switching vacuum tools shouldn’t mean walking back and forth to your storage closet.

With this Dyson V7 V8 attachment holder, your commonly used accessories can stay attached to the vacuum wand while you clean.

1. Need your crevice tool for the edge of a sofa?
2. Switching to a dusting tool for furniture?
3. Moving from the living room to the stairs?

Your tools stay close so you can change attachments quickly and continue cleaning.

It’s a simple upgrade that helps make your vacuum setup more organized and convenient.

Will It Fit My Vacuum?

Compatible With

This accessory holder is designed for the following compatible vacuum models:

• Dyson V7 – SV11
• Dyson V8 – SV10
• Dyson V8 – SV25

Please check the model number of your vacuum before ordering.

Not Compatible With

This holder is designed specifically for the compatible V7 and V8 models listed above.

Not compatible with other Dyson vacuum series or models not included in the compatibility list.

If you are unsure which vacuum you have, check the model information on your machine before purchasing.

Important Compatibility Note

Model number matters.

Vacuum cleaners with similar names may use different wand or attachment designs. Please confirm your model number matches SV10, SV11 or SV25 before ordering.

Not sure whether it fits?

Contact VACEXT with a photo of your vacuum and model information, and we’ll help you check compatibility before you buy.

Organize Your Tools While You Clean

Instead of storing every attachment in a separate box or drawer, this vacuum accessories holder keeps essential cleaning tools directly on your vacuum wand.

Great for keeping attachments organized in:

• Apartments
• Closets
• Laundry rooms
• Garages
• Utility rooms
• Small storage spaces
• Everyday home cleaning setups

The two-pack design gives you more flexibility to organize the accessories you use most.

No Drilling. No Wall Installation.

This product attaches directly to the compatible vacuum wand.

You don’t need to drill holes, install screws or dedicate additional wall space to organize your accessories.

Simply:

1. Snap the holder onto the vacuum wand.

2. Insert your compatible vacuum attachment into the storage slot.

3. Keep your cleaning tools within reach while you clean.

A Simple Way to Stop Losing Vacuum Attachments

Small vacuum accessories are easy to misplace.

Crevice tools end up in drawers. Brushes get left in closets. Attachments disappear into storage bins.

This vacuum accessory organizer gives your frequently used tools a dedicated place directly on your vacuum.

Less searching.

Less clutter.

Faster tool changes.

Product Specifications

Product Type: Vacuum Attachment Holder / Accessory Organizer
Compatibility: Dyson V7 SV11, V8 SV10, V8 SV25
Installation: Snap-on / Clip-on
Drilling Required: No
Tools Required: No
Mounting Location: Compatible vacuum wand
Quantity: 2 Attachment Holders
Use: Vacuum attachment storage and organization

What’s in the Box?

2 × Vacuum Attachment Holders

Vacuum cleaner and cleaning attachments are not included.

Please Note

This product is an attachment organizer only.

It is not a charger and not a wall-mounted charging docking station.

The vacuum cleaner, wand and cleaning accessories shown in demonstration images are not included unless otherwise stated.

Why Choose the VACEXT Vacuum Attachment Holder?

KEEP TOOLS CLOSE

Keep frequently used accessories directly on your vacuum instead of returning to storage.

SIMPLE SNAP-ON SETUP

Install in seconds without drilling, screws or additional tools.

MORE ORGANIZED CLEANING

Give small vacuum attachments a dedicated storage location.

COMPACT & LIGHTWEIGHT

Designed for convenient everyday use without adding unnecessary bulk.

TWO HOLDERS INCLUDED

Use both holders to organize more of the attachments you reach for most often.

Frequently Asked Questions: 

Does this holder fit Dyson V7?

It is designed to fit the compatible Dyson V7 SV11 model listed on this page. Please check your model number before ordering.

Does it fit Dyson V8?

It is designed for compatible Dyson V8 SV10 and SV25 models. Please confirm your machine code before purchasing.

Does this fit every Dyson V7 and V8 vacuum?

Compatibility can vary by machine version. We recommend confirming that your model number is SV10, SV11 or SV25 before ordering.

Does it need to be screwed into the wall?

No. This is a drill-free vacuum attachment holder that clips directly onto the compatible vacuum wand.

Is this a replacement docking station?

No. This product is an accessory storage holder. It is not a wall docking station and does not charge your vacuum.

Can I leave the holder on the wand while cleaning?

Yes. The holder is designed to keep compatible cleaning attachments conveniently stored on the wand while you move around your home.

How many holders are included?

Each package includes 2 attachment holders.

Are vacuum attachments included?

No. The package includes the two accessory holders only unless otherwise stated.

What should I do if I’m not sure about compatibility?

Check your vacuum’s model number before ordering. You can also contact VACEXT with your vacuum model information or a photo, and we’ll help you check compatibility.

Keep Your Vacuum Tools Organized & Ready

Stop searching through drawers and closets every time you need a different cleaning tool.

With the For Dyson V7 V8 Accessories Holder, your most-used vacuum attachments stay organized, close at hand and ready for your next cleaning task.

Snap it on. Store your tools. Keep cleaning.

_______________

Let’s enjoy reliable after-sales support for a worry-free experience!

To learn more about VACEXT, we encourage our customers to review our Terms of Service, Shipping Policy, Privacy Policy and Refund Policy.

Check out the Vacext YouTube channel if you’re passionate about replacement vacuum attachments

Visit more of our products from Vacext here

Thank you for choosing Vacext!

————————————————————————————————————————————————————————————–

Dyson and related model names are trademarks of their respective owner. VACEXT is not affiliated with or endorsed by Dyson. References to Dyson are used only to describe product compatibility.